close

Green non-toxic event wristbands walmart is true,event wristbands

ducts are on the market.However, there are also some inferior or counterfeit silicone products.So how do we judge the quality of silicone products when we buy silicone products? First, wear resistance Wear resistance is formed after the production of athletic silicone products. The surface of silicone products can resist loss. Good athletic silicone products generally have little surface friction because of external factors, do not affect the appearance of performance, text, color. However, the surface characters of inferior quality silicone products are easy to fall off. Second. Tear strength and tensile strength Athletic silicone products with high tear strength have outstanding anti destructive ability,Long life,not easily affected by external environment. Poor tearing strength of silicone products is generally manifested in the tearing process prone to cracks, thus rapidly expanding the cracking and causing damage. Third, hardness and tensile stress An important indicator of the rigidity (stiffness) of the rubber material. Hardness and elongation stress are the forces needed to produce certain deformation of silicone products.So when buying silicone products, the most important thing is to look at the wear resistance, elasticity and tear strength first. If it meets the requirements, it is a good quality silicone product. If it is not satisfied, give up, so as not to cause financial loss. Fourth. Elasticity Athletic silicone products have good elasticity because high elasticity mainly comes from the movement of molecular segments of silicone.So when buying silicone products, look at the elasticity of silicone products to judge the quality. Fifth. Fatigue resistance When the silicone product is subjected to alternating stress (or strain), the change in the structure and properties of the material is called fatigue. The fatigue damage is caused by fatigue failure as the fatigue process proceeds.       camo-silicone-wristbands24-hour-silicone-wristbands

a kind of low-cost, high-efficiency advertising promotional gifts. Most of the sports bracelets have no practical use, just a fashion jewelry. This kind of handband usually reflects the beliefs and values of the wearer.   Production process First: Drawing design Drawing design is generally based on the size of the sample provided by customers to draw production drawings, generally using graphic drawing software, such as CDR or AI software production, if customers can not provide samples, we can according to customer requirements, free to cooperate with customers to complete the design and production of drawings. Second: Mould opening Mould opening is that the master of the mould works out the offset plate according to the designed drawings, then uses the offset plate to engrave the copper worker, and finally uses the copper worker to engrave the steel mold. Some of the bracelet moulds are made in a relatively high technical content and a relatively long time; generally, the opening period is calculated according to five days. With the mold, production will be fast. Third: color mixing According to the color number mixing rubber on the international Pantone color card designated by the customer, our company matches the color, and the color difference is very small. Fourth: Approval materials Each bracelet is weighed electronically and weighs about 5.5 grams. Fifth: Upper Mould Production When the mould is ready, it will be manufactured on the machine. After installing the mould, the machine needs to be heated up. A machine with nine moulds can produce about 15,000 pieces per day. Sixth: Quality Inspection After the bracelet is manufactured, it is necessary to check the quality of the bracelet, which mainly depends on whether the bracelet conforms to the specifications. If it does not conform to the specifications, all the bracelets will be discarded. Seventh: trimming Every bracelet will leave a residual edge when it is manufactured. After the quality inspection department has passed the inspection, the product will be sent to the later process department for trimming. (The average number of trims per person per day is about 3,000). Eighth: Inspection of finished products After trimming the edges, they are finished products. It is also necessary to send the finished product back to the product inspection department to check the trimming quality, whether there are substandard products, if any, it will be scrapped. Ninth: Packaging Department After the edge-repaired prodevent wristbandsucts have passed the inspection, they are packed according to the customer"s requirements. Packaging can be divided into two types: PP bag independent packaging and naked packaging. Both are 100 pieces a bag. Twenty packs and one box (2000 pieces) are usually the export standard boxes. Generally packing according to customer"s requirements. Tenth: Inspection before sealing After the packing is finished, the QC department will check the quantity. If there is no problem, it will seal the box and send it to the warehouse for delivery.   Process characteristics Silicone bracelet is made of 100% pure natural solid silicone rubber pressed by oil press, which has certain tension and softness, so it is easy to deform and recover immediately. Silicone bracelet has the characteristics of wear resistance, high temperature resistance, non-distortion, non-toxic, odorless, no side effects on human body, and is soft, non-cracking, long service life, non-irritating skin, etc. Silicone bracelet has the advantages of soft, non-cracking, non-irritating skin, etc. It"s a real green jewevent wristbandselry. Some functional materials, such as negative ions, germanium, titanium and far infrared, are added to the raw materials of silica gel bracelets for processing, which has certain health functions and is popular all over the world. Additional logos of companies and enterprises are more prominent, closer to people"s lives, and have a good publicity effect.             medical-id-alert-silicone-bracelets

event wristbands walmart